INA SN55 needle roller bearings

C:31.85 kN; A:54 mm; Designation of bearing:ES209-28G2T04; Recommended tightening torque for set screw:8 Nm; s1:33.4 mm; T min.:-40 °C; L:190 mm; C0:20.8 kN; S:11 mm; A1:37 mm;

T max.:200 °C; C:12.8 kN; d:12 mm; H:30.2 mm; T min.:-20 °C; H2:62 mm; Recommended tightening torque for set screw:5.5 Nm; A1:22 mm; G:M6x1; s1:15.5 mm;

rs min:0.6 mm; Characteristic cage frequency, FTF:0.47 Hz; d:60 mm; da min:64 mm; Characteristic inner ring frequency, BPFI:16.89 Hz; Lubrication hole on inner ring:Non/No; Max operating temperature, Tmax:120 °C; C0r:139 kN; Brand:NTN; Nlim (oil):6,000 rpm;

J:105 mm; A1:13 mm; T max.:100 °C; C0:20.8 kN; Designation of housing:FE209N-; e:24 mm; Weight:2.25 kg; Recommended tightening torque for set screw:11.5 Nm; G:R1/8"; Designation of bearing:UC209G2;

Min operating temperature, Tmin:-20 °C; Max operating temperature, Tmax:120 °C; Product Group:B04144; Manufacturer Name:NTN; Fw:55 mm; Weight / Kilogram:0.067; Mass:0.07 kg; Characteristic inner ring frequency, BPFI:21.39 Hz; Bc:30 mm; Characteristic rolling element frequency, BSF:22.96 Hz;

e:10 mm; C0:7.88 kN; S:7.5 mm; T max.:200 °C; d:23.81 mm; A1:7 mm; J:90 mm; Recommended tightening torque for set screw:3.7 Nm; H3:70; L:115 mm;

Inventory:0.0; Dynamic load, C:156 kN; Category:Bearings; d1:89.5 mm; d:70 mm; Weight / Kilogram:1.61; Nlim (grease):4,500 rpm; r1s min:1.5 mm; da min:78 mm; Da max:117 mm;

Designation of bearing:UC205G2L3; H2:72 mm; B:34 mm; C0:7.88 kN; T max.:100 °C; N:M10; L:84 mm; Designation of housing:PA205N-; d:25 mm; S:14.3 mm;

L:86 mm; S:17 mm; T max.:100 °C; Recommended tightening torque for set screw:5.5 Nm; A2:41.5 mm; Z:22.3 mm; d:15 mm; A:25.5 mm; d1:32.4 mm; A1:11 mm;

H:47.6 mm; L1:35 mm; d:31.75 mm; d1:51.1 mm; B1:51.1 mm; N:M12; B:37.6 mm; Recommended tightening torque for set screw:8 Nm; Designation of housing:PG207-; A:48 mm;

Z:76.1 mm; T min.:-20 °C; Dz:100 mm; A:54 mm; Designation of open end cover:SCOU210-30; d:47.62 mm; G:R1/8"; Designation of closed end cover:SCC210; C:35.1 kN; A1:34 mm;

L:135 mm; Recommended tightening torque for set screw:16.8 Nm; d:47.62 mm; Designation of housing:PAE210-; H:57.2 mm; J:101.6 mm; T min.:-20 °C; S:19 mm; E:20 mm; H2:115 mm;

A:33.5 mm; Dz:70 mm; d:30 mm; G:R1/8"; A1:12 mm; Designation of housing:FE206N-; s1:19.7 mm; T max.:100 °C; Designation of bearing:LK206G2H; T min.:-20 °C;

A1:11 mm; C0:4.78 kN; d1:27.2 mm; G:M6x1; C:9.55 kN; N:12mm; Recommended tightening torque for set screw:3.7 Nm; B1:28.6 mm; Weight:0.44 kg; L:57 mm;

T min.:-20 °C; s1:36.95 mm; A2:49.4 mm; G:M6x1; J:150 mm; S:12 mm; N:19mm; Designation of bearing:ES211-32G2; T max.:100 °C; A4:30 mm;