Toyana 4302-2RS deep groove ball bearings

H1:12 mm; L:103 mm; G:R1/8"; N:M10; J:82.6 mm; Designation of housing:PAE207-; C0:15.2 kN; T min.:-40 °C; B1:51.1 mm; C:25.7 kN;

da - Cone Frontface Backing Diameter:405.89 mm; e - ISO Factor8:0.42; Y - ISO Factor9:1.43; C - Cup Width:63.500 mm; C0 - Static Radial Rating:710000 lbf; R - Cone Backface To Clear Radius1:14.990 mm; Db - Cup Backface Backing Diameter:482.09 mm; B:82.553 mm; Bearing Weight:44.100 Kg; D:514.350 mm;

Bearing Used:Deep Groove Ball Bea; Seals:ZZ (Double Shield); Bearing Part Number:6001; Shape:Flange Type; Bearing Retained:Yes (with retaining; Number of Bearings:Double; Bearing I.D. d(mm):12; Days to Ship:7 Days; Flange O.D. H(φ):52; Housing Material:[Aluminum Alloy] 201;

Unit, Type:Insert Bearing Unit; Accessory:With cast iron cover; Surface Treatment:No; Days to Ship:8 Days; Fit:J7; Pillow Type, Category:Standard; Diameter series symbol:Used for Light load; Unit, Type:Insert Bearing Unit; Basic Load Rating, Static Rating(N):11300; Machining:No;

s1:13.5 mm; C0:7.88 kN; Designation of housing:F205N-; T min.:-20 °C; A2:35.5 mm; T max.:200 °C; N:12mm; Designation of open end cover:SCOU205-16; Weight:0.79 kg; Dz:60 mm;

G:R1/8"; Weight:2.69 kg; Designation of bearing:UC210-30G2T04; A1:13 mm; d:47.62 mm; Designation of housing:FE210N-; e:28 mm; Recommended tightening torque for set screw:16.8 Nm; Dz:100 mm; N:18mm;

s1:23 mm; d:12 mm; Weight:0.39 kg; B:19 mm; N:11,5mm; A2:39.1 mm; e:17 mm; Designation of housing:FLE203N-; A1:9.5 mm; C:9.55 kN;

Combination of Angular Contact Ball Bearings:Single Row; O.D.(Ø):100; Type symbol:No; Retainer Type:Resin Forming; Max. Allowed rpm(rpm):6300; Preload:Normal preload; Rolling Element Material:[Steel] Steel; Outer Ring:With Outer Ring; Inner/Outer Ring Material:[Steel] Steel; Seal, Shield Symbols:No;

L1:17 mm; B:19.1 mm; Designation of housing:PG203-; A:30 mm; B1:28.6 mm; S:6.5 mm; T max.:100 °C; Weight:0.33 kg; E:15 mm; J:38 mm;

Type:Ball; Outer Ring Shape:Flat; D:47; Days to Ship:9 Days; Retainer Type:Punching; Number of Raceway Ring Rows:Single Row; d:20; Rolling Element Material:Steel; Preload Mark:CM; B:14;

SW:4.76 mm; s1:25.8 mm; d:49.21 mm; Designation of bearing:UC210-31G2L4; G:M6x1; L1:90 mm; A1:16 mm; L2:16 mm; A5:32.6 mm; H:117 mm;

Sub Series:1..KL; Outside Ring Width C:22.000 mm; Dimension S1:35 mm; Bore Type:Cylindrical bore; Material:Bearing Steel; Series:Industrial; Weight:0.50 lb; Radius r:0.6 mm; Number of Set Screws:2; Center of Bearing from End S:21.4 mm;

C:9.55 kN; S:6.5 mm; N:9mm; Designation of housing:FCE203-; d1:27.2 mm; T max.:200 °C; A2:24.1 mm; B:19.1 mm; L:100 mm; G:M6x1;

a - Effective Center Location3:-0.8 mm; G1 - Heat Generation Factor (Roller-Raceway):692.3; Cage Type:Stamped Steel; D:298.450 mm; Y - ISO Factor9:1.28; Da - Cup Frontface Backing Diameter:273.05 mm; G2 - Heat Generation Factor (Rib-Roller End):93.9; Ab - Cage-Cone Frontface Clearance:6.3 mm; Design

Bolt Size:4 x 1; Dimension H2:14.2 in; Series Type:Light Series; Shaft Size:5.5 in; Dimension H :6-5/16 in; Dimension L :21-3/4 in; Bearing Number:LSE508BR; Bearing UPC:013992027283; Cor - Static Load Rating:131675 lbf; Seal Type:Kevlar Packing Seal;